Concrete Cost Guide
Concrete Cost per m2 in Melbourne, VIC
See what plain, reinforced and exposed aggregate jobs cost per square metre, then send your measurements for a free quote from Concreters Melbourne Pros.
Prices by Project
Concrete Prices by Project Type
Every figure below is a per m2 guide for Melbourne jobs. Your exact price depends on site conditions, slab thickness and finish, so use these ranges as a starting point.
Concrete Driveway Cost per m2
Plain concrete runs $79 to $160 per m2 in Melbourne. Longer or sloping driveways with tricky site access sit toward the top.
Concrete Slab Cost per m2
Reinforced concrete runs $65 to $200 per m2. A standard house slab is typically 100 mm thick and often uses 20 MPa concrete.
Aggregate Driveway Cost
Expect $125 to $210 per m2 for exposed aggregate. Premium stone and patterned finishes can push the aggregate costs higher.
Aggregate Concrete and Decorative Finishes
Coloured concrete costs $100 to $210 per m2 and stamped finishes $125 to $210. Specialised finishes can reach $450 per m2.
Concrete Driveway Cost per m2
Plain concrete runs $79 to $160 per m2 in Melbourne. Longer or sloping driveways with tricky site access sit toward the top.
Concrete Slab Cost per m2
Reinforced concrete runs $65 to $200 per m2. A standard house slab is typically 100 mm thick and often uses 20 MPa concrete.
Aggregate Driveway Cost
Expect $125 to $210 per m2 for exposed aggregate. Premium stone and patterned finishes can push the aggregate costs higher.
Aggregate Concrete and Decorative Finishes
Coloured concrete costs $100 to $210 per m2 and stamped finishes $125 to $210. Specialised finishes can reach $450 per m2.
Free Quote Form
Get a Concrete Quote for Your Site
Send your measurements and photos through the quote form. We reply with a free, itemised written quote and no obligation.
Cost Guides for Every Concrete Service
Call 0466 045 564Concrete is sold by the cubic metre, but installation is usually priced per square metre. That is why one concreting project can quote very differently from the next. Each service below has its own cost guide for Melbourne, VIC, with ranges for size, finish and prep work. Use them to set a realistic budget before you ask for a quote.
Concrete Driveways Cost
Plain concrete starts at $79 per m2. Read the driveway cost guide for size, finish and prep work ranges.
Learn More
Exposed Aggregate Cost
Exposed aggregate runs $125 to $210 per m2. Natural stone choice and pattern move the price. Read the aggregate cost guide.
Learn More
Concrete Slabs Cost
Reinforced slabs cost $65 to $200 per m2. Read the slab cost guide for house, garage and shed slab prices.
Learn More
Concrete Patios & Paths Cost
Patio and path prices depend on area, finish and surface. See the patio cost guide for size-based ranges.
Learn More
Concrete Repairs & Resurfacing Cost
Resurfacing can cost less than replacing old concrete. See the resurfacing cost guide for price per square metre.
Learn More
Polished Concrete & Grinding Cost
Polished concrete starts from $50 per square metre, depending on finish and floor condition. See the polished concrete cost guide.
Learn MorePrices vary depending on site access, slab thickness and finish, so treat each range as a guide. Send your measurements and we will confirm the final price in writing.
Cost Questions
Concrete Volume, Mix and Pricing FAQs
Plan Your Budget
Plan for Additional Costs Before You Pour
Beyond the per m2 rate, budget for excavation, old concrete removal, pump hire, bar chairs, council approval from your local council where needed, and small-load surcharges. These items are calculated separately, so ask for them in your written quote. Working to a tight budget? Tell us early and we will suggest cost effective options.
Areas We Quote
Concrete Removal and Pouring Across Melbourne, VIC
We quote across Greater Melbourne, from the south-east and western suburbs to the Mornington Peninsula, Sunbury and Craigieburn. Distance and site access can affect your price.